Nortel Networks LIP-6830 - Manual (Page 43)

LIP-6812 & LIP-6830 Installer Guide
Rev 01.04 37 June 07
5) Press
the [ OK ] Softkey to change to the selected Ring type.
6) Press the button to exit from the menu.
An asterisk » is displayed in front of the current selection.
3.6.3 Ringer
Off
The LIP Phones can be programmed not to ring when an incoming call is received.
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 3.Phone Settings using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
3) Press button, or move cursor to 3.Ringer Off using the [Next]/[Prev] Softkeys, and
press the [ OK ] Softkey.
4) Press the [Yes ] Softkey to enable Ringer Off, or press the [ No ] Softkey to disable Ringer
Off.
5) Press the button to exit from the menu.
3.6.4 Headset Auto Mode
The LIP-6812 & LIP-6830 support the use of the Headset. When Headset Auto Mode is enabled,
pressing a Line button will automatically connect audio to the headset. Also, redial and click-to-
call will place calls with audio through the headset.
To enable Headset Auto Mode:
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 3.Phone Settings using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
3) Press button, or move cursor to 4.Headset Auto Mode using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
Ringer Off
Current value is ‘No’.
[Yes ] [ No ] ¼
Ring Type
*Type 1
[Play] [Next] [ OK ] Ж