Nortel Networks LIP-6830 - Manual (Page 44)

LIP-6812 & LIP-6830 Installer Guide
Rev 01.04 38 June 07
4) Press the [Yes ] Softkey to enable the Headset Auto Mode or press the [ No ] Softkey to
disable the Headset Auto Mode.
5) Press the button to exit from the menu.
3.6.5 DSS
Registration
A DSS console with 48 flexible keys can be associated with the LIP Phone to provide additional
Speed Dial buttons.
To add a DSS console to the LIP-6812/LIP-6830:
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 3.Phone Settings using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
3) Press button or move cursor to 5.DSS Registration using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
4) Input the MAC address of DSS console using the Dial pad, and press the [ OK ] Softkey to
save your Configuration.
5) Press the button to exit from the menu.
To remove a DSS console from LIP-6812/LIP-6830, delete each digit of the MAC
address using the [
Å ] Softkey and then press the [ OK ] Softkey.
If the DSS console is connected successfully, the status of connection is shown in
the 8.Information menu
To enter alpha-numeric characters select the [Mode] Softkey (refer to Appendix E.
for the character mapping of Dial pad digits).
The DSS Console provides special LED indications for troubleshooting.
Problem Explanation
After DSS Console is connected to power, the
24 LEDs in upper- and down-side blink red
alternatively.
The LAN link to DSS Console is down
Headset Auto Mode
Current value is ‘No’.
[Yes ] [ No ]
Enter MAC of DSS [1]
00405A000001
[ » ] [Mode] [ OK ] ¼