Nortel Networks LIP-6830 - Manual (Page 60)

LIP-6812 & LIP-6830 Installer Guide
Rev 01.04 54 June 07
5) Press the button to exit the menu.
3.7.3 Call Waiting Tone
While off-hook, the LIP Phone can provide a tone to indicate a Call Waiting over the existing
conversation.
To set Call Waiting tone:
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 4.Call Preferences using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
3) Press button, or move cursor to 3.Call Waiting Tone using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
4) Press the [Yes ] Softkey to enable Call Waiting Tone, or press the [ No ] Softkey to disable
Call Waiting Tone.
5) Press the button to exit the menu.
3.7.4 Call Hold Ringback
When a call is on hold at the User extension, the LIP Phone will ring when the user returns to
idle.
To set Call Hold Ringback:
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 4.Call Preferences using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
3) Press button, or move cursor to 4.Call Hold Ringback using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
4) Press the [Yes ] Softkey to enable Call Hold Ringback, or press [ No ] Softkey to disable
Call Hold Ringback.
Call Waiting Tone
Current value is ‘Yes’.
[Yes ] [ No ]
Call Waiting
Current value is ‘Yes’.
[Yes ] [ No ]