Nortel Networks LIP-6830 - Manual (Page 47)

LIP-6812 & LIP-6830 Installer Guide
Rev 01.04 41 June 07
To assign the SNTP server address:
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 3.Phone Settings using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
3) Press button, or move cursor to 7.Time Configuration using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
4) Press button, or move cursor to 1.SNTP Server Address using the [Next]/[Prev]
Softkeys, and press the [ OK ] Softkey.
5) Input the SNTP Server IP Address for the LIP-6812/LIP-6830 using the Dial pad.
6) Press
the [ OK ] Softkey to save your Configuration.
7) Press the button to exit from the menu.
To enter alpha-numeric characters select the [Mode] Softkey (refer to Appendix E. for
the character mapping of Dial pad digits).
3.6.7.2 Time
Zone
For proper operation of the clock in the LIP-6812/LIP-6830, the local Time Zone must be
entered in phone memory.
To assign the Time-Zone:
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 3.Phone Settings using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
3) Press button, or move cursor to 7.Time Configuration using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
4) Press button, or move cursor to 2.Time Zone using the [Next]/[Prev] Softkeys, and
press the [ OK ] Softkey.
5) Select the Time Zone desired using the [Next]/[Prev] Softkeys.
SNTP Server Address [a]
pool.ntp.org
[ » ] [Mode] [ OK ] ¼