Nortel Networks LIP-6830 - Manual (Page 48)

LIP-6812 & LIP-6830 Installer Guide
Rev 01.04 42 June 07
6) Press
the [ OK ] Softkey to change to the selected time zone.
7) Press the button to exit from the menu.
An asterisk » is displayed in front of the current selection (select the nearest region as
shown in Appendix D).
3.6.7.3 DST Auto Adjustment
The LIP-6812 & LIP-6830 can automatically adjust for DST when enabled.
To enable automatic Day Light Savings time:
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 3.Phone Settings using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
3) Press button, or move cursor to 7.Time Configuration using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
4) Press button, or move the cursor to 3.DST Auto Adjustment using the [Next]/[Prev]
Softkeys, and press the [ OK ] Softkey.
5) Press the [Yes ] Softkey to enable DST Auto Adjustment, or press the [ No ] Softkey to
disable DST Auto Adjustment.
6) Press the button to exit the menu.
3.6.7.4 Time
Format
The format of the LCD time display can be set to disable time display, display 12 hour format, or
display 24 hour format.
To modify the Time Format:
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
Time Zone
*(GMT-08:00) PACIFIC STA
[Prev] [Next] [ OK ]
DST Auto Adjustment
Current value is ‘Yes’.
[Yes ] [ No ]