Nortel Networks LIP-6830 - Manual (Page 51)

LIP-6812 & LIP-6830 Installer Guide
Rev 01.04 45 June 07
Changing the Provisioning Type requires a reboot of the LIP-6812/LIP-6830; when you
leave the menu, you will receive a Reboot notice.
An asterisk » is displayed in front of the current selection.
3.6.8.2 TFTP Server Address
When TFTP provisioning is selected, the IP address of the TFTP server must be defined. The
TFTP Server address may be retrieved automatically from the DHCP server or set manually.
To enter a TFTP Server Address:
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 3.Phone Settings using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
3) Press button, or move cursor to 8.S/W Update using the [Next]/[Prev] Softkeys, and
press the [ OK ] Softkey.
4) Press button, or move cursor to 2.TFTP Server Address using the [Next]/[Prev]
Softkeys, and press the [ OK ] Softkey.
5) Input the TFTP Server IP Address using the Dial pad, and press the [ OK ] Softkey to save
your Configuration.
6) Press the button to exit the menu.
Changing the TFTP Server Address requires a reboot of the LIP-6812/LIP-6830; when
you leave the menu, you will receive a Reboot notice.
3.6.8.3 HTTPS
Provisioning
The HTTP/HTTPS server URL, is a required parameter for HTTP/HTTPS provisioning.
Normally, TCP port 80 is employed for HTTP, and port 443 is employed for HTTPS file transfers.
Also a User Name and Password is assigned, if required by the HTTP/HTTPS server for
authentication.
The HTTPS server must support SSL for proper operation.
3.6.8.3.1 Provisioning
URL
The provisioning URL is the URL of the HTTP/HTTPS server.
To assign the HTTPS Provisioning URL:
TFTP Server Address
192.168.0.2
[ » ] [CLR ] [ OK ]