Nortel Networks LIP-6830 - Manual (Page 22)

LIP-6812 & LIP-6830 Installer Guide
Rev 01.04 16 June 07
The Subnet Mask only can be changed from Static mode and not if DHCP mode is
active.
Changing the Subnet Mask requires a reboot of the LIP-6812/LIP-6830; when you leave
the menu, you will receive a Reboot notice.
3.4.4 Default
Gateway
For the static IP Address scheme, you must configure the Default Gateway address; this is a
mandatory setting for proper operation.
To assign a Default Gateway:
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 1.Network Configuration using the [Next]/[Prev]
Softkeys, and press the [ OK ] Softkey.
3) Press button, or move cursor to 4.Default Gateway using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
4) Input the Default Gateway IP address for the LIP-6812/LIP-6830 using the Dial pad, and
press the [ OK ] Softkey to save your Configuration.
5) Press the button to exit from the menu.
The Default Gateway only can be changed from Static mode and not if DHCP mode is
active.
Changing the Default Gateway requires a reboot of the LIP-6812/LIP-6830; when you
leave the menu, you will receive a Reboot notice.
3.4.5 Primary DNS Address
If an FQDN is assigned as any of the servers in the LIP Phone configuration, the Primary
Directory Name Server (DNS) is contacted to resolve the FQDN server address. This is an
optional but recommended setting.
To assign the DNS address:
1) Press the button. If the LCD Menu is locked, use the unlock (refer to Section 3.3
Lock/Unlock Configuration).
Subnet Mask
255.255.255.0
[ » ] [CLR ] [ OK ]
Default Gateway
192.168.0.1
[ » ] [CLR ] [ OK ]