Nortel Networks LIP-6830 - Manual (Page 30)

LIP-6812 & LIP-6830 Installer Guide
Rev 01.04 24 June 07
Changing the Call Server Address requires a reboot of the LIP-6812/LIP-6830; when
you leave the menu, you will receive a Reboot notice.
To enter alpha-numeric characters select the [Mode] Softkey (refer to Appendix E. for
the character mapping of Dial pad digits).
3.5.1.2 Proxy
Port
The Proxy Port defines the TCP/UDP port number employed for SIP signalling transport. In
common practice, port number ‘5060’ is used.
To change the Proxy Port number:
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 2.SIP Configuration using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
3) Enter the Line number or move cursor using the [Next]/[Prev] Softkeys, and press the
[ OK ] Softkey to select a Line.
4) Press button, or move cursor to 2.Proxy Port using the [Next]/[Prev] Softkeys, and
press the [ OK ] Softkey.
5) Input the Proxy Port for the LIP-6812/LIP-6830 using the Dial pad.
6) Press
the [ OK ] Softkey to save your Configuration.
7) Press the button to exit from the menu.
Changing the Proxy Port requires a reboot of the LIP-6812/LIP-6830; when you leave
the menu, you will receive a Reboot notice.
3.5.1.3 Display
Name
When assigned, the Display Name is used in SIP headers as the Caller ID name.
To enter a Display Name:
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 2.SIP Configuration using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
Proxy Port
5060
[ » ] [CLR ] [ OK ]