Nortel Networks LIP-6830 - Manual (Page 62)

LIP-6812 & LIP-6830 Installer Guide
Rev 01.04 56 June 07
5) Press the button to exit the menu.
3.7.7 Caller ID Blocking
The LIP Phone normally sends the assigned Display Name as the SIP Caller ID; the LIP Phone
can send an Anonymous Caller ID in SIP headers.
To set Caller Id Bloccking:
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 4.Call Preferences using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
3) Press button, or move cursor to 7.Caller ID Blocking using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
4) Press the [ Yes ] Softkey to enable Caller ID Blocking, or press the [ No ] Softkey to disable
Caller ID Blocking.
5) Press the button to exit the menu.
3.7.8 Anonymous Call Block
The LIP-6812 & LIP-6830 can block incoming calls that are using Anonymous Caller ID.
To set Anonymous Call Blocking:
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 4.Call Preferences using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
3) Press button, or move cursor to 8.Anonymous Call Block using the [Next]/[Prev]
Softkeys, and press the [ OK ] Softkey.
4) Press the [Yes ] Softkey to enable Anonymous Call Block, or press the [ No ] Softkey to
disable Anonymous Call Block.
Auto Answer
Current value is ‘Yes’.
[Yes ] [ No ]
Caller ID Blocking
Current value is ‘Yes’.
[Yes ] [ No ]