Nortel Networks LIP-6830 - Manual (Page 80)

LIP-6812 & LIP-6830 Installer Guide
Rev 01.04 74 June 07
- ~ – matches a string of characters of any length.
- , – locates the position of a Pause.
- . – returns dial tone”
The following are examples of Dial Plans using the Routing Table.
Simple Dial Plan using the Routing Table
Process the call after any 7 digit number is dialed or if the Operator is dialed at digit ‘0’.
Number TRNC Pre Post Pause Extra
0?????? 0 NULL NULL ?, 0.0.0.0
??????? 0 NULL NULL NULL 0.0.0.0
From this table, if the user dials '0' as the first digit, the LIP phone will wait for the pause time for
additional digits. After the pause, if no additional digits are dialed, the phone places a call to the
Operator. In addition, after the user dials any seven digits, the call is processed.
Complex Dial Plan
Process the call after the local operator at 0, long distance operator at 00, a four-digit local
extension number starting with 3,4 or 5, a seven-digit local number prefixed by an 8, two-digit
number preceded by star (‘*’), a ten digit long distance number prefixed by 91, or an
international number starting with 9011 is dialed.
Number TRNC Pre Post Pause Extra
0? 0 NULL NULL ?, 0.0.0.0
00 0 NULL NULL NULL 0.0.0.0
3??? 0 NULL NULL NULL 0.0.0.0
4??? 0 NULL NULL NULL 0.0.0.0
5??? 0 NULL NULL NULL 0.0.0.0
8??????? 0 NULL NULL NULL 0.0.0.0
*?? 0 NULL NULL NULL 0.0.0.0
91?????????? 0 NULL NULL NULL 0.0.0.0
0 9011~ 0 NULL NULL NULL 0.0.0.0
2
nd
Dial Tone
To provide second dial tone after a ‘9’ is dialed, establish a Dial Plan as below.
Number TRNC Pre Post Pause Extra
9.~ 0 NULL NULL ?, 0.0.0.0
To change Routing Table parameters:
1) Assure the Routing Table radial button is selected under the Dial Plan Type
2) Enter the desired values into the respective boxes.
3) Select the button.
To delete an entry from routing table:
1) Enter the entry’s index.