NCR S26 - Manual (Page 102)

Using the EISA Configuration Utility
5-12 Using the System Utilities
8. To print the information, select Print by pressing F7. The “Print settings”
screen displays.
– If you have a printer attached to your computer, select “Print all
configuration settings” or “Print settings for selected board or option,”
and press Enter to print a hard copy of the switch and jumper settings
and other configuration information.
– If you do not have a printer, select “Print all configuration settings to
a file” or “Print settings for selected board or option to a file.” A
“Print information to TXT file” screen displays.
– If you want to print the switch and jumper settings to a different
diskette, insert a diskette in drive A and press Enter. Another “Print
Information to TXT File” screen displays. Enter the name of your file
or choose an existing filename and press Enter.
Note: If you inserted a different diskette, remember to reinsert the System
Configuration diskette after printing is complete.
9. Press F10 when you are through. The “Steps in configuring your
computer” screen displays.