NCR S26 - Manual (Page 43)

Upgrading the Video Memory
NCR S26 Hot Plug Server User Guide 3-11
Upgrading the Video Memory
Increased video memory permits you to display higher resolution and more
colors. The system board has 1 MB of video memory factory-installed. You
may upgrade the video memory to 2 MB.
To upgrade the video memory, follow these steps:
1. Locate the video DRAM upgrade socket labeled U18 and U21 on the
system board. See the figure below.
Figure 3-4. Installing a Video Memory Chip
Pin 1
Indicator
Notched
Corner
2. Gently insert a video chip into each of the upgrade sockets. Make sure
that the pin 1 indicator on the chip matches the notched corner of the
socket.