Entering setup – NCR S26 User Manual

Page 59

Advertising
background image

Entering Setup

NCR S26 Hot Plug Server User Guide

4-3

Entering Setup

CAUTION: Close all open files and leave your application program before
entering Setup. You cannot exit back into an application. The system
automatically reboots when you leave Setup.

Press the key combination Ctrl + Alt + Esc during the power-on self-
test (POST) to enter Setup. The BIOS Utility (Setup) main menu, as shown in
in the figure below appears.

Note: You can only enter Setup during POST. After POST, pressing
Ctrl + Alt + Esc has no effect.

Figure 4-1. BIOS Utility (Setup) Main Menu

BIOS Utility

Basic System Configuration

Advanced System Configuration

PCI System Configuration

Non-PnP ISA Card Configuration

Power Saving Configuration

System Security

Remote Diagnostic Configuration

Load Setup Default Settings

= Move Highlight Bar,

= Select, Esc = Exit and Reboot

Advertising