Reconfiguring the system – NCR S26 User Manual

Page 42

Advertising
background image

Installing and Removing SIMMs

3-10

Adding and Replacing Components

Reconfiguring the System

Reconfigure the system after installing or removing SIMMs.

To reconfigure the system, follow these steps:

1. Reboot the system. A memory error message appears, indicating that the

total memory does not match the value stored in CMOS.

2. Press Ctrl + Alt + Esc to run Setup. A warning message appears,

indicating a wrong memory configuration.

3. Press Esc twice to exit Setup and reboot the system.

Advertising