NCR S26 - Manual (Page 103)

Using the EISA Configuration Utility
NCR S26 Hot Plug Server User Guide 5-13
10. Select “Step 5: Save and exit” and press Enter. The screen, as shown in
Figure 5-6, displays.
Figure 5-6. Save and Exit
Step 5: Save and Exit
In order to complete the configuration process, you must
save your configuration. In this step, you must select whether
to save your configuration or to discard your changes before
exiting this program.
(The files will not be created if you are running on a CD.)
If you choose to discard the configuration, any changes
you have made will be lost.
If you choose to save, this program will save the new
configuration in your computer's nonvolatile memory and
in a SYSTEM.CHL and SYSTEM.SCI files in your current
directory, and then your computer will be restarted for you.
Save the configuration and restart the computer
Discard the configuration and return to main menu
Select = ENTER <Cancel = ESC>
11. To save your changes, select “Save the configuration and restart the
computer” and press Enter. To discard the changes, choose “Discard the
configuration and return to the main menu.” Any changes that you made
are lost.
12. When the reboot screen displays, press Enter.
13. Turn off the computer and remove the System Configuration diskette.