Removing a 5.25-inch peripheral drive, Installing a hot plug fixed disk drive – NCR S26 User Manual
Page 55
Advertising
Installing Drives
NCR S26 Hot Plug Server User Guide
3-23
Removing a 5.25-inch Peripheral Drive
To remove a 5.25-inch peripheral drive, follow these steps:
1. Disconnect all the drive cables.
2. Press the metal tabs on the sides of the drive and pull the drive out as
shown in the figure below.
Figure 3-13. Pulling the Drive Out
Installing a Hot Plug Fixed Disk Drive
To install a hot plug fixed disk drive, refer to Appendix D in this manual. The
complete procedure is described there.
Advertising