NCR S26 - Manual (Page 81)

System Security
NCR S26 Hot Plug Server User Guide 4-25
Serial Port 1 Base Address
This parameter permits you to set serial port 1 logical base address.
Table 4-2. Serial Port 1 Settings
Setting Description
3F8h (default) Serial port 1 with address 3F8h using IRQ4
2F8h Serial port 1 with address 2F8h using IRQ3
3E8h Serial port 1 with address 3E8h using IRQ4
2E8h Serial port 1 with address 2E8h using IRQ3
Disabled Disables serial port 1
Serial Port 2 Base Address
This parameter permits you to set serial port 2 logical base address.
Table 4-3. Serial Port 2 Settings
Setting Description
3F8h Serial port 2 with address 3F8h using IRQ4
2F8h (default) Serial port 2 with address 2F8h using IRQ3
3E8h Serial port 2 with address 3E8h using IRQ4
2E8h Serial port 2 with address 2E8h using IRQ3
Disabled Disables serial port 2
Note: If you assign 3F8h to serial port 1, you can only assign 2F8h or 2E8h
to serial port 2. If you assign 2F8h to serial port 1, you can only assign 3F8h
or 3E8h to serial port 2.
Parallel Port Base Address
The system has one parallel port. The table below lists the options for
selecting the parallel port address. You also have the option to disable the
parallel port.