Nortel Networks NN46120-104 - Manual (Page 144)

144 The Command Line Interface
Idle Timeout
The VPN Gateway will disconnect your local console connection
or remote connection (Telnet or SSH) after 10 minutes of inactivity.
This value can be changed to a maximum value of 1 hour using the
/cfg/sys/adm/clitimeout command.
If you have unapplied configuration changes when automatically
disconnected after the specified idle timeout value, the unapplied
configuration changes will be lost. Therefore, make sure to save your
configuration changes regularly by using the global
apply command.
If you have unapplied configuration changes when using the global exit
command to log out from the command line interface, you will be prompted
to view the pending configuration changes by using the global
diff
command. After verifying the pending configuration changes, you can
either remove the changes or apply them. For more information about
pending configuration changes, see the "Viewing, Applying and Removing
Changes " section under Configuration Menu in the Command Reference.
Nortel VPN Gateway
User Guide
NN46120-104 02.01 Standard
14 April 2008
Copyright © 2007-2008 Nortel Networks
.