Nortel Networks NN46120-104 - Manual (Page 172)

172 Troubleshooting the NVG
System Diagnostics
A few system diagnostics can be performed on the VPN Gateway.
Installed Certificates and Virtual SSL Servers
To view the currently installed certificates, type the following command:
>> # /info/certs
To view detailed information about a specific certificate, access the
Certificate menu and specify the desired certificate by its index number:
>> # /cfg/cert
Enter certificate number: (1-) <certificate number by index>
>> Certificate 1# show
To view the configured virtual SSL servers, type the following command:
>> # /info/servers
The screen output provides information about which certificate (indicated
by certificate index number) is used by each configured SSL server.
Network Diagnostics
To check if the VPN Gateway is able to contact configured gateways,
routes, DNS servers, authentication servers, and IP addresses/domain
names specified in group links, use the following command:
>> # /maint/chkcfg
The screen output provides information about each configured item (e.g.
gateway, DNS server etc.) and shows whether the network test was
successful or not. Besides checking the connection, the method (e.g. ping)
for checking each item is displayed.
To check various network settings for a specific VPN Gateway, access the
iSD Host menu by typing the following commands:
>> # /cfg/sys/host
Enter iSD host number: (1-) <iSD host by index number>
>> iSD Host 1# cur
Nortel VPN Gateway
User Guide
NN46120-104 02.01 Standard
14 April 2008
Copyright © 2007-2008 Nortel Networks
.