Nortel Networks NN46120-104 User Manual
Page 48
48
Initial Setup
•
VPN Portal IP address. Used by remote users to connect to
the VPN.
•
DNS search list. Enables use of short names on the
Portal, for example,
inside
to connect the server
inside.example.com.
•
HTTP to HTTPS redirection. Automatically redirects requests
made with HTTP to the proper HTTPS server configured for
the VPN, for example,
http://vpn.example.com
gets
redirected to
https://vpn.example.com.
To view all settings created by the VPN quick setup wizard, see
“Settings Created by the VPN Quick Setup Wizard” (page 49)
4
To configure IPsec access in your VPN, run the IPsec quick
setup wizard.
With IPsec access enabled, remote users can access the VPN
through a secure IPsec tunnel using the Nortel IPsec VPN client
(formerly Contivity).
Setup IPsec [no]: yes
Creating default IKE profile under ipsec/ikeprof 1
Creating default user tunnel profile under
ipsec/utunprof 1
Configuring IPsec Group login under aaa/group
trusted/ipsec
Do you want to use IPsec Group login [no]: yes
Enter IPsec secret: secret
Enter Lower IP address in pool range: 10.10.10.1
Pub
_newline ?>
Enter Upper IP address in pool range:
10.10.20.99
Enter Network mask for the pool range:
[255.255.255.0]
: 16
Creating IP pool 1
Nortel VPN Gateway
User Guide
NN46120-104
02.01
Standard
14 April 2008
Copyright © 2007-2008 Nortel Networks
.