Nortel Networks NN46120-104 - Manual (Page 202)

202 Syslog Messages
No certificate supplied by backend server when doing SSL connect.
Session terminated to backend server.
•
No CN supplied in server cert <subject>
No CN found in the subject of the certificate supplied by the backend
server.
• Bad CN supplied in server cert <subject>
Malformed CN found in subject of the certificate supplied by the
backend server.
•
Shutting sslproxy down.
Traffic subsystem has been stopped.
•
Restarting proxy due to <reason>
Traffic subsystem restarted due to <reason>
•
DNS alarm: dns server(s) are UP
At least one DNS server is now up.
• HC: backend <ip>:<port> is down
Backend health check detected backend <ip>:<port> to be down.
• HC: backend <ip>:<port> is up again
Backend health check detected backend <ip>:<port> to be up.
Startup Messages
The Traffic Processing Subsystem Startup messages only include the
INFO category.
INFO
•
HSM mode: <mode>
Hardware Security Mode <mode>.
•
Disabling transparent proxy, non-compatible with pooling
Transparent proxy mode is disabled due to pooling being enabled
(startup message).
• Set CSWIFT as default
Using CSWIFT SSL hardware acceleration. (startup message).
• Using <hwtype> hardware
Using <hwtype> hardware for SSL acceleration. (startup message)
• Loaded <ip>:<port>
Initializing virtual server <ip>:<port>.
• Because we use clicerts, force adjust totalcache size to: <size>
per server that use clicerts
Generated if the size of the SSL session cache has been modified.
•
No more than <nr> backend supported
Nortel VPN Gateway
User Guide
NN46120-104 02.01 Standard
14 April 2008
Copyright © 2007-2008 Nortel Networks
.