Nortel Networks NN46120-104 - Manual (Page 47)

Complete the New Setup 47
To maintain a high level of security when accessing the VPN
Gateway through an SSH connection, it is recommended that
you accept the default choice to generate new SSH host keys.
Make sure you remember the password you define for the
admin user. You will need to provide the correct admin user
password when logging in to the cluster for configuration
purposes, and also when adding another VPN Gateway to the
cluster by performing a
join in the Setup menu.
( new setup, continued)
Generate new SSH host keys (yes/no) [yes]: <Press ENTER
to accept>
This may take a few seconds...ok
Enter a password for the "admin" user:
Re-enter to confirm:
3 If you will be using the VPN feature, run the VPN quick setup
wizard to set up a working VPN for SSL access in a few
steps.
The VPN quick setup wizard creates all the settings required to
enable a fully functional Portal for testing purposes. You can
later let your test Portal evolve to a fully operative Portal.
Run VPN quick setup wizard [yes]: <press ENTER to run
the wizard>
Creating default networks under /cfg/vpn
1/aaa/network
Creating default services under /cfg/vpn
1/aaa/service
Enter VPN Portal IP address: <IP address>
Is this VPN device used in combination with an Alteon
switch? [no]: Enter comma separated DNS search list
(eg company.com,intranet.company.com): example.com
Create HTTP to HTTPS redirect server [yes]: <press
ENTER to accept>
Create a trusted portal account [yes]: <press ENTER to
create the account>
User name: john
User password: password
Creating group ’trusted’ with secure access.
Creating user ’john’ in group ’trusted’.
Creating empty portal linkset ’base-links’ for group
trusted.
Nortel VPN Gateway
User Guide
NN46120-104 02.01 Standard
14 April 2008
Copyright © 2007-2008 Nortel Networks
.