Nortel Networks NN46120-104 User Manual
Page 161
Boot User Password
161
(
join
setup, continued)
Verify that CODE-SO iKey (black) is inserted in card 1
(with flashing LED).
Hit enter when done.
Verify that HSM-USER iKey (blue) is inserted in card 1
(with flashing LED).
Hit enter when done.
Verify that CODE-USER iKey (black) is inserted in card 1
(with flashing LED).
Hit enter when done.
Wrap key successfully split combined to card 1.
10
If you selected FIPS mode as the security mode, specify the
secret passphrase.
Enter the same secret passphrase as you specified in
. This step only appears if you selected FIPS mode when
initializing the HSM cards.
(
join
setup, continued)
Enter the secret passphrase (as given during
initialization of the first iSD in the cluster): <Enter
the same secret passphrase as was used in the former
cluster.>
If you chose FIPS mode when initializing the first HSM card in
the cluster, you will be asked to enter the secret passphrase.
Enter the same secret passphrase as when initializing the first
HSM card in the cluster.
11
Wait for the setup of the added ASA 310-FIPS to finish.
(
join
setup, continued)
Setup successful.
login:
12
Log in to the ASA 310-FIPS that you are currently connected
to and restore the configuration file of the former cluster
from an FTP/TFTP/SCP/SFTP server.
Nortel VPN Gateway
User Guide
NN46120-104
02.01
Standard
14 April 2008
Copyright © 2007-2008 Nortel Networks
.