Nortel Networks NN46120-104 - Manual (Page 215)

INFO 215
Table 9
Syslog Messages in Alphabetical Order (cont’d.)
Message Severity Type Explanation
Ignoring unauthenticated
informational message from %s
WARNING IPsec Dropping message without the
authentication hash.
ike Connected successfully to
erlang
INFO IPsec IKE daemon has started and
connected to the registry
database.
Ike not started due: No license NOTICE IPsec If no licence can be found (such
as on old ASA 310), IKE is not
started.
internal error: <no> ERROR Traffic
Processing
An internal error occurred.
Contact support with as much
information as possible to
reproduce this message.
IPSec Mobility is disabled.
Roaming request denied.
WARNING IPsec Dropping the roaming request,
the Mobility is disabled in
configuration.
IPSec SA Established with %s,
IPComp %s, inbound CPI 0x%x
INFO IPsec IPsec SA Established.
IPSEC server ~s uses default
interface (interface ~p not
configured)
WARNING IPsec This indicates possible badly
configured default gateways
on some Secure Service
Partitioning interface.
IPSEC server <id> uses default
interface (interface <n> not
configured)
WARNING Traffic
Processing
A specific interface is configured
to be used by the IPsec
server but this interface is
not configured on the VPN
Gateway.
ISAKMP SA Established with
%s
INFO IPsec ISAKMP SA Established.
isd_down ALARM
(CRITICAL)
System Control A member of the NVG cluster is
down. This alarm is only sent if
the cluster contains more than
one VPN Gateway.
javascript error: <reason> for:
<host><path>
ERROR Traffic
Processing
JavaScript parsing error
encountered when parsing
content from <host><path>.
This could be a problem in the
NVG JavaScript parser, but
most likely a syntactical error in
the JavaScript on that page.
Nortel VPN Gateway
User Guide
NN46120-104 02.01 Standard
14 April 2008
Copyright © 2007-2008 Nortel Networks
.