Nortel Networks WEB OS 212777 User Manual
Page 138
Web OS 10.0 Application Guide
138
n
Chapter 6: Server Load Balancing
212777-A, February 2002
3.
If the Virtual Matrix Architecture (VMA) feature is enabled, add proxy IP addresses for
all other switch ports (except port 9).
VMA is normally enabled on the switch. In addition to enhanced resource management, VMA
eliminates many of the restrictions found in earlier versions of the Web OS. VMA does
require, that when any switch port is configured with a proxy IP address, all ports must be con-
figured with unique proxy IP addresses. If VMA is disabled, only the client port needs a proxy
IP address and this step can be skipped.
The following commands can be used for configuring the additional unique proxy IP
addresses:
N
OTE
–
Port 9 does not require a proxy IP address under VMA.
For conceptual information, see
“Virtual Matrix Architecture” on page 217
of this manual and
for information on using the commands, see the Web OS Command Reference
(
/cfg/slb/adv/matrix
) for more information.
4.
Apply and save your changes.
N
OTE
–
Remember that you must
apply
any changes in order for them to take effect, and you
must
save
them if you wish them to remain in effect after switch reboot. Also, the
/info/slb
command is useful for checking the state of Server Load Balancing operations.
>> SLB port 6# /cfg/slb/port 1
(Select network port 1)
>> SLB port 1# pip 200.200.200.70
(Set proxy IP address for port 1)
>> SLB port 1# ../port 2
(Select network port 2)
>> SLB port 2# pip 200.200.200.71
(Set proxy IP address for port)
>> SLB port 2# ../port 3
(Select network port 3)
>> SLB port 3# pip 200.200.200.72
(Set proxy IP address for port 3)
>> SLB port 3# ../port 4
(Select network port 4)
>> SLB port 4# pip 200.200.200.73
(Set proxy IP address for port 4)
>> SLB port 4# ../port 7
(Select network port 7)
>> SLB port 7# pip 200.200.200.74
(Set proxy IP address for port 7)
>> SLB port 7# ../port 8
(Select network port 8)
>> SLB port 8# pip 200.200.200.75
(Set proxy IP address for port 8)