Nortel Networks WEB OS 212777 - Manual (Page 461)

Web OS 10.0 Application Guide
Chapter 17: Bandwidth Management n 461
212777-A, February 2002
5. Set the bandwidth policy for this contract.
Each BWM contract must be assigned a bandwidth policy.
6. Enable this BWM contract.
7. Select the second bandwidth policy.
8. Set the hard, soft, and reserved rate limits for this policy, in Mbps.
9. On the switch, select the second BWM contract and name the contract.
10. Set the bandwidth policy for this contract.
Each BWM contract must be assigned a bandwidth policy.
11. Enable this BWM contract.
>> BWM Contract 1# pol 1 (Assign policy 1 to BWM contract 1)
>> BWM Contract 1# ena (Enables this BWM contract)
>> BWM Contract 1# /cfg/bwm/policy 2 (Select BWM policy 2)
>> Policy 2# hard 18 (Set “never exceed” rate)
>> Policy 2# soft 15 (Set desired bandwidth rate)
>> Policy 2# resv 10 (Set committed information rate)
>> Policy 2# /cfg/bwm/cont 2 (Select BWM contract 2)
>> BWM Contract 2# name b.com (Assign contract name “b.com”)
>> BWM Contract 2# pol 2 (Assign policy 2 to BWM contract 2)
>> BWM Contract 2# ena (Enables this BWM contract)