Nortel Networks WEB OS 212777 User Manual
Page 311
Web OS 10.0 Application Guide
Chapter 12: Global Server Load Balancing
n
311
212777-A, February 2002
Use the following commands to configure a proximity table on the Web switch at Site 4:
N
OTE
–
For each client subnet, add only one static entry.
Using this configuration, the DNS request “nortelnetworks.com” from 205.178.13.0 will get a
DNS response with only the virtual server IP address of Site 1, if Site 1 has less load than
Site 3.
>> # /cfg/slb/gslb/lookup/lookups ena
(Enable the lookup or proximity table
)
>> # dname nortelnetworks.com
(Select the domain name
)
>> # network 1
(Select Client A subnet
)
>> # sip 205.178.13.0
(Assign source address for Client A
)
>> # mask 255.255.255.0
(Assign the mask for Client A
)
>> # vip1 <
virtual server IP addr of Site 3
>
(Select preferred Site 3
)
>> # vip2 <
virtual server IP addr of Site 1
>
(Select preferred Site 1
)
>> # ../network 2
(Select Client B subnet
)
>> # sip 204.165.0.0
(Assign source address for Client B
)
>> # mask 255.255.0.0
(Assign the mask for Client B
)
>> # vip1 <
virtual server IP add of Site 4
>
(Select preferred Site 4
)
>> # vip2 <
virtual server IP add of Site 2
>
(Select preferred Site 2
)