Nortel Networks WEB OS 212777 - Manual (Page 400)

Web OS 10.0 Application Guide
400 n Chapter 15: Content Intelligent Switching
212777-A, February 2002
5. Apply and save your configuration changes.
6. Identify the defined string IDs.
For easy configuration and identification, each defined string has an ID attached, as shown in
the following example:
Number of entries: six
7. Configure the real server(s) to support WCR.
N OTE – If you don't add a defined string (or add the defined string “ any ”), the server will han-
dle any request.
Add the defined string(s) to the real servers:
where ID is the identification number of the defined string.
The server can have multiple defined strings. For example: “/images”, “/sales”, “.gif”
With these defined strings, the server can handle requests that begin with “/images” or “/sales”
and any requests that contain “.gif”.
8. Define a real server group and add real servers to the group.
The following configuration combines three real servers into a group:
>> # /cfg/slb/layer7/slb/cur
ID SLB String
1 any
2 .gif
3 /sales
4 /xitami
5 /manual
6 .jpg
>> # /cfg/slb/real 2/layer7/addlb <ID>
>> # /cfg/slb/group 1 (Select real server group 1)
>> Real server group 1# add 1 (Add real server 1 to group 1)
>> Real server group 1# add 2 (Add real server 2 to group 1)
>> Real server group 1# add 3 (Add real server 3 to group 1)