Configure the second dirty-side webswitch (db) – Nortel Networks WEB OS 212777 User Manual
Page 365
Web OS 10.0 Application Guide
Chapter 14: Virtual Private Network Load Balancing
n
365
212777-A, February 2002
Configure the Second Dirty-Side WebSwitch (DB)
1.
Turn off BOOTP.
2.
Define and enable VLAN 2 for ports 7 and 8.
3.
Turn off STP.
4.
Configure IP interfaces 1, 2, and 3.
5.
Configure routes for each of the IP interfaces you configured in Step
4.
>> # /cfg/sys/bootp dis
>> # /cfg/vlan 2/ena/def 7 8
>> # /cfg/stp/off
>> # /cfg/ip/if 1/ena/mask 255.255.255.0/addr 192.168.10.11
>> # /cfg/ip/if 2/ena/mask 255.255.255.0/addr 10.0.0.20/vl 2
>> # /cfg/ip/if 3/ena/mask 255.255.255.255/addr 10.0.0.21/vl 2
>> # /cfg/ip/route
>> # add 20.0.0.10 255.255.255.255 10.0.0.101 2
>> # add 20.0.0.11 255.255.255.255 10.0.0.102 3
>> # add 20.0.0.20 255.255.255.255 10.0.0.101 2
>> # add 20.0.0.21 255.255.255.255 10.0.0.102 3