NEC Express 5800/320Lc - Manual (Page 102)

3-28 Windows Setup and Operation
9. Select and right-click a disk, and then
select [Convert to Dynamic Disk].
IMPORTANT: If [Foreign] appears, execute [Convert to Dynamic Disk] after [Convert
to Basic Disk] is executed.
10. Open the disk’s properties to check the target IDs. In the following figures, disks are
configured as:
Disk 1: Target ID 1
Disk 2: Target ID 2
Disk 4: Target ID 1
Disk 5: Target ID 2
Disks with the same target ID are mirrored.
Disk 1 Disk 2