NEC Express 5800/320Lc - Manual (Page 60)

2-26 General Description
PCI Board Slot Status LEDs (P1, P2, P3)
To show the status of PCI board slots, each PCI module has three status LEDs.
LED
indications
Description Action
PCI board is mounted
correctly and operates
in duplex mode. The system operates normally. Off
The PCI board is not
mounted; is mounted
incorrectly; or power
is not supplied. If the PCI board is not mounted or is mounted
incorrectly, just mount it correctly; there is no problem.
Check the condition of power unit.
If the problem persists, contact your sales agent.
Amber PCI board is mounted
correctly and operates
in simplex mode. Simplex mode is not a problem.
To make the server fault-tolerant, attach a PCI board
to a slot of the same on the other PCI module.
Red Although the PCI
board is mounted, it
may be offline or not
be working. Remount the PCI board correctly.
Remount the PCI module correctly.
If the problem persists, contact your sales agent.
For LED indications when option boards are attached, see “PCI Module” in Chapter 8.
Disk LED
A DISK LED shows the status of a hard disk that is mounted in a slot of the 3.5-inch hard disk drive
bay. Combined, the disk LEDs on PCI modules 1 and 2 show the status of the hard disks.
PCI
module 1 PCI
module 2
Description Action
Green/Off* Green/Off*
The hard disk drives are mirrored
and operating normally. -
Mirroring the DISKs by the RDR
function. Wait for the mirroring to be
completed. Green/Off* Amber
Some trouble occurred on a hard
disk of the PCI module 1.
The hard disk drive in the PCI
module 2 is running without
mirror. Reconfigure the hard disk mirror.
(See “DISK OPERATIONS” in
Chapter 3, Windows Setup and
Operation)
If the problem persists, contact
your sales agent.
Mirroring the DISKs by the RDR
function. Wait for the mirroring to be
completed. Amber Green/Off*
Some trouble occurred on a hard
disk of the PCI module 2.
The hard disk drive in the PCI
module 1 is running without
mirror. Reconfigure the hard disk mirror.
(See “DISK OPERATIONS” in
Chapter 3, Windows Setup and
Operation)
If the problem persists, contact
your sales agent.
Amber Amber Mirroring DISK by Disk
Management. Wait until the mirroring is finished.
* The DISK LEDs becomes off (blinks) when the hard disk drive is accessed.