NEC Express 5800/320Lc - Manual (Page 144)

System Configuration 4-25
ft Memory
Select "ft Memory" on the System Hardware menu and press Enter to display the following screen.
See the table below for setup options on the screen.
Option Parameter Description Your Setting
Size [0] Size of ft Memory is specified (MB)
Start Address - Shows the start address of ft Memory (view
only)
[ ]: Factory-set
IMPORTANT:
Unless you use ft Memory, do not change the factory setting.
To use ft Memory, you need to prepare an “ft Memory RAM Disk.”
If you specify/change the size of ft Memory on the ft Memory RAM Disk (not this menu), the
changes will take effect automatically.
For details, see manuals included with the ft Memory RAM Disk.