NEC Express 5800/320Lc User Manual
Page 309
8-8 System Upgrade
7.
Firmly hold the handle of the hard disk to install and insert the hard disk into the slot.
TIPS:
Engage the upper and lower frames of the
tray with the left and right grooves on the
3.5-inch hard disk drive bay and insert the
hard disk.
Insert the disk until the lever hook touches
the server frame.
Check the orientation of lever. Insert the hard
disk with the lever unlocked.
8.
Slowly close the lever.
When the lever is locked, you will hear a click sound.
IMPORTANT:
Be careful not to pinch your finger(s) between the lever and handle.
TIPS:
Check the hook of the lever is engaged with the frame.
9.
Connect all the power cords.
10.
Press the POWER switch to turn on the system power.
11.
<Tower model>
Close the front bezel and lock it with the security key.
<Rack-mount model>
Install the upper and lower panels and lock the front bezel with the security key.
A while after Windows Server 2003, Enterprise Edition is started, [New Hardware
Detection] wizard is displayed.
12.
Select [Make known drivers for this device displayed and select a driver from the list] and
click [Next].
13.
Check that "Stratus Dual Initiated disk Device" is displayed in the list, and click [Next]
repeatedly until [Finish] is displayed.
14.
Set the dual disk configuration (see Chapter 3).