NEC Express 5800/320Lc - Manual (Page 346)

System Upgrade 8-45
8. A warning message tells that you
are about to update a driver. Click
[Yes] to continue.
The driver will be installed.
* During the processing, the mouse cursor may not
be moved for 10 to 20 seconds. Please wait.
9.
Click [Finish].
* This wizard will start up as many times as the
installed Fibre Channel controllers. Repeat steps
1 to 10. .
10. Select [Control Panel] –
[Administrative Tools]- [Computer
Management] – [Device Manager],
and confirm that there are as many
[Qlogic QLA23xx PCI Fibre
Channel Adapter]s as the installed
Fibre Channel Controllers under
[SCSI and RAID controller].
IMPORTANT:
StoragePathSavior is required to connect iStorage using N8803-031F.
PortDuplexManager is required to connect FC DISK ARRAY (N8190-110F) using
N8803-031F.
Insert Fibre Channel Controllers after the installation of OS is completed. Use
Fibre Channel Controllers in pairs. Insert a Fibre Channel Controller into a slot in
a PCI module and another Fibre Channel Controller into the slot at the same
location in another PCI module.
How to confirm the status: