NEC Express 5800/320Lc - Manual (Page 136)

System Configuration 4-17
See the table below for setup options on the screen.
Option Parameter Description Your Setting
On Board SCSI Disabled
[Enabled] Enable or disable expansion of SCSI
BIOS on the motherboard.
On Board LAN 1, 2 Disabled
[Enabled] LAN1: Enable or disable 10/100BASE
LAN controller on the
motherboard.
LAN2: Enable or disable 1000BASE
LAN controller on the
motherboard.
PCI Slot 1 - PCI Slot 3 Disabled
[Enabled] Enable or disable BIOS on a device
(board) connected to the PCI bus.
Select "Enabled" for the graphic
accelerator board. Always select
"Enabled" for the SCSI PCI device to
which the hard disk that contains OS
is connected.
Select "Disabled" for Option ROM of
PCI LAN device when the network
boot feature is not used. #1:
#2:
#3:
[ ]: Factory-set
IMPORTANT:
For the slot which a graphical accelerator board is installed, do not specify “Disabled”.