NEC Express 5800/320Lc - Manual (Page 145)

4-26 System Configuration
Boot
Move the cursor onto "Boot" to display the Boot menu.
ATAPI CD-ROM Drive
+ Removable Device
+ Hard Drive
Intel(R) Boot Agent Version 4.0.1.7
Item Specific Help
Main Advanced Security System Hardware Boot
Phoenix BIOS Setup Utility
Exit
F1 Help -/+ Change Values F9 Setup Defaults
F10 Save Changes & Exit Sub-Menu Enter Select Esc Exit
Select Item
Select Menu
Use <
select a device, then
press <+> to move it up
the list, or <
move it down the list.
Press <Esc> to exit
this menu.
>or< >to
>to
The server searches for the boot device according to the order specified in this menu and use the
software to boot the system if found.
You can change the boot device order using
↑ or ↓ and + or –. Move the cursor to select the device
by
↑ or ↓, and then change the priority using + or –.
IMPORTANT: Specify the device boot order as shown above to start the NEC
EXPRESSBUILDER.