NEC Express 5800/320Lc - Manual (Page 112)

3-38 Windows Setup and Operation
Remove the other adapter in the same way.
<For on-board >
- Status emb-82559 10/100 Enet Adapter
- Status emb-82544GC Copper Gigabit Adapter
<For option board >
- Status AA-U51500 10/100 Enet Adapter (100BASE-TX)
- Status AA-U57000 Fiber Gigabit Adapter (1000 BASE-SX)
- NEC 8490 XT Copper Gigabit Adapter (1000 BASE-T)
4. Right click [Team #1:Adaptive Fault Tolerance Mode] and select [Remove].
At that time, the dialog box shown on the right is displayed. This is a message for
confirmation, so click [Yes] button.
Remove all teams displayed on the [Intel PRO Set II] dialog box in the same manner.