NEC Express 5800/320Lc - Manual (Page 352)

System Upgrade 8-51
Supplement
Before using backup devices:
If any of following backup devices is used for internal SCSI connector of NEC Express5800/ft
series, you may need to update your firmware for backup devices.
If your backup device to be connected is any of the following models, refer to the manual_E.pdf in
your attached NEC Express Builder (CD-ROM). That file describes detailed procedures to update
your firmware.
List of backup devices and firmware
Model # NEC Model Name Latest Firmware Revision
N8151-29F Built-In AIT Auto Loader L1nb
N8151-34AF Built-In AIT 07n6
N8151-36F Built-In AIT Auto Loader L7n7
N8151-39F Built-In DAT Auto Loader L2n4
N8151-45F Built-In DAT 02n9
N8151-46F Built-In AIT 01nm
N8151-41AF Built-In AIT 01nm
All tape devices are needed to update the firmware if the firmware revision is older than
above.