NEC Express 5800/320Lc - Manual (Page 84)

3-10 Windows Setup and Operation
Importing Data Disks
This section describes a procedure to import a data disk using Disk Management.
IMPORTANT: If you import the disk used as a boot disk on another system, it becomes
impossible to boot from the disk.
1. Insert the disk to import.
2. Foreign Dynamic Disk is
displayed on [Disk
Management].
In the figure on the right, Disk 2
and Disk 3 are the inserted
disks.
3. Right-click the disk to import
and select [Import Foreign
Disks…].
4. In the [Import Foregn Disks] dialog box, select
the disk group to import and click [OK].