NEC Express 5800/320Lc User Manual
Page 238
Installing and Using Utilities 5-75
9.
Right-click the server name to
open the pop-up menu and
select [Open Remote Console]
to open [MWA Remote
Console].
10.
Select the [Action at Remote Console Connect] command from the popup menu displayed
by right-clicking the server window to display the [Action at Remote Console Connect]
dialog box. Then select [Go MWA mode].
11.
Insert NEC EXPRESSBUILDER CD-ROM into the drive of the computer to be managed
and insert floppy disk storing the configuration information (CSL_LESS.CFG) into the
FDD drive.
12.
Hook up the management PC to LAN.
13.
Power off and on the main unit to reboot the system.
After one reboot, the main menu will appear on the management PC’s screen, on which you
can perform hardware setup and run utilities.
TIPS:
If the configuration information (CSL_LESS.CFG) in the FD has already been
loaded, the main menu will appear without a reboot.
14.
When the main menu appears on the management PC’s screen, eject the floppy disk.
15.
If you use other tools, exit NEC EXPRESSBUILDER and power off/on the main unit.
IMPORTANT:
After completing the procedure for remote console connection, uncheck
[Reset] of [Activate] in [Property] dialog box.