Netopia Router PN Series - Manual (Page 111)

IPX Setup 5-7
IPX in the answer profile
The answer profile can be configured to accept calls from remote
IPX networks. To configure the answer profile to accept calls from
remote IPX networks, go to the Default Answer Profile screen.
Note: The Default Answer Profile screen varies according to
configuration.
Default Answer Profile
Authentication... None
Force 56k on Answer: No
Max. Receive Packet Size: 1500
Stac Data Compression... None
Must Match a Defined Profile: No
B Channel Usage... 1 B Channel
Idle Timeout: 120
IP Enabled: Yes
IP Parameters...
IPX Enabled: Yes
IPX Parameters...
Configure values which may be used when receiving a call in this screen.
To enable IPX routing in the answer profile, select IPX Enabled and
toggle it to Yes. When IPX Enabled is set to Yes, the item IPX
Parameters appears below it.
To configure IPX routing in the answer profile, select IPX Parameters
and go to the IPX Parameters (Default Answer Profile) screen. The
items in this screen are similar to the IPX Profile Parameters items
of the same name (see
page 5-7 ).