Netopia Router PN Series - Manual (Page 160)

7-18 Reference Guide
Add IP Filter Set
Filter Set Name: Filter Set 2
Display/Change Input Filter...
Add Input Filter...
Delete Input Filter...
Display/Change Output Filter...
Add Output Filter...
Delete Output Filter...
ADD FILTER SET CANCEL
Configure the Filter Set name and its associated Filters.
Naming a new filter set
All new filter sets have a default name. The first filter set you add will
be called Filter Set 1, the next filter will be Filter Set 2, and so on.
To give a new filter set a different name, select Filter Set Name and
enter a new name for the filter set.
To save the filter set, select ADD FILTER SET. The saved filter set is
empty (contains no filters), but you can return to it later to add filters
(see
“Modifying filter sets” on page 7-24 ). Or you can add filters to
your new set before saving it (see “Adding filters to a filter set” on
page 7-20 ).
Select CANCEL to leave the Add Filter Set screen without saving the
new filter set and return to the Filter Sets screen.