Netopia Router PN Series - Manual (Page 166)

7-24 Reference Guide
Modifying filter sets
To modify a filter set, select Display/Change Filter Set in the Filter
Sets screen to display a list of filter sets.
Select a filter set from the list and press Return to go to the Change IP
Filter Set screen. The items in this screen are the same as the ones
in the Add Filter screen (see
“Adding filters to a filter set” on
page 7-20 ).
Change IP Filter Set
Filter Set Name: Basic Firewall
Display/Change Input Filter...
Add Input Filter...
Delete Input Filter...
Display/Change Output Filter...
Add Output Filter...
Delete Output Filter...
Deleting a filter set
Note: If you delete a filter set, all of the filters it contains are deleted
as well. To reuse any of these filters in another set, you’ll have to note
their configuration before deleting the current filter set and then
recreate them.
To delete a filter set, select Delete Filter Set in the IP Filter Sets
screen to display a list of filter sets.
Select a filter set from the list and press Return to delete it. Press the
Escape key to exit the list without deleting the filter set.