Netopia Router PN Series - Manual (Page 90)

4-10 Reference Guide
Non-Small Office models
only
IP Setup
Ethernet IP Address: 192.168.6.137
Ethernet Subnet Mask: 255.255.255.248
Default IP Gateway: 0.0.0.0
DNS Server: 0.0.0.0
Secondary DNS Server: 0.0.0.0
Domain Name:
Receive RIP: Off
Transmit RIP: Off
Static Routes...
Set up the basic IP attributes of your Netopia in this screen.
Follow these steps to configure IP Setup for your Corporate Netopia
Router:
■ Select Ethernet IP Address and enter the IP address for the
Netopia Router’s Ethernet port.
■ Select Ethernet Subnet Mask and enter the subnet mask for
the Ethernet IP Address that you entered in the last step.
■ Select Default IP Gateway and enter the IP address for a
default gateway. This can be the address of any major router
accessible to the Netopia Router.
A default gateway should be able to successfully route packets
when the Netopia Router cannot recognize the intended
recipient’s IP address. A typical example of a default gateway is
the ISP’s router.