Netopia Router PN Series - Manual (Page 44)

2-28 Reference Guide
T1 and DDS models only 10. The Interface Group field reflects the active port selection: the
internal CSU for T1 or DDS, or SA port for SA, if backup is
enabled. See “CSU Backup” on page 2-55 for more
information.
Models with Switched
circuits only
11. Select Telco Options and press Return. The Telco Options
screen appears. The Telco Options screen contains items that
allow you to control the calls made on the WAN line with this
particular connection profile.
Telco Options
Initiate Data Service... 64 kb/sec
Dial... Dial In/Out
Number to Dial:
Alternate Number to Dial:
Dial On Demand: Yes
Idle Timeout (seconds): 300
CNA Validation Number:
Callback: No
In this Screen you configure options for the ways you will establish a
link.
ISDN Switched circuit
models only
■ Select Initiate Data Service and choose the correct ISDN
bandwidth to use with this connection profile. In North America,
users are not guaranteed of having a 64k connection to their
destination, but only when 64k is not available from point A to
point B should 56k be selected. The Router automatically falls
back to 56k when 64k service is not available. It is advised to
select 56k when you know that the 64k service will fail. You
may also select Speech if your line is provisioned for this
feature and the call is within your local ISDN region. Selecting
Speech may save money, but it is not guaranteed to work
outside of your switch.