Netopia Router PN Series - Manual (Page 70)

2-54 Reference Guide
■ Select AM or PM and choose AM or PM. The AM or PM item
appears only if the time is in the 12-hour clock format.
■ Select Scheduled Window Duration and enter the maximum
duration allowed for this scheduled window (not for the call). Use
the same format restrictions noted above.
You are done configuring the once-only options. Return to the Add
Scheduled Connection screen to continue.
■ In the Add Scheduled Connection screen, select Use Connection
Profile and choose from the list of connection profiles you have
already created. A scheduled connection must be associated with
a connection profile to be useful. The connection profile becomes
active during the times specified in the associated scheduled
connection, if any exists.
■ Select ADD SCHEDULED CONNECTION to save the current
scheduled connection. Select CANCEL to exit the Add Scheduled
Connection screen without saving the new scheduled connection.
Modifying a scheduled connection
To modify a scheduled connection, select Display/Change Scheduled
Connection in the Scheduled Connections screen to display a table of
scheduled connections.
Select a scheduled connection from the table and go to the Change
Scheduled Connection screen. The parameters in this screen are the
same as the ones in the Add Scheduled Connection screen (except
that ADD SCHEDULED CONNECTION and CANCEL do not appear). To
find out how to set them, see
“Adding a scheduled connection” on
page 2-51 .
Deleting a scheduled connection
To delete a scheduled connection, select Delete Scheduled
Connection in the Scheduled Connections screen to display a table of
scheduled connections.
Select a scheduled connection from the table and press the Return
key to delete it. To exit the table without deleting the selected
scheduled connection, press the Escape key.