Netopia Router PN Series - Manual (Page 186)

9-4 Reference Guide
Current Frame Relay Status
Leased line with Frame
Relay enabled only Current Frame Relay Status
----DLCIs In Use----Bytes Rx----Bytes Tx----Frames Rx----Frames Tx----FECNs+BECNs--
0 0 0 0 0 0
DLCIs In Use: Indicates the number of data link connection
identifiers currently in use.
Bytes Rx: Indicates the total number of bytes received on the WAN
link.
Bytes Tx: Indicates the total number of bytes sent on the WAN link.
Frames Rx: Indicates the total number of frames received on the
WAN link.
Frames Tx: Indicates the total number of frames sent on the WAN
link.
FECNs+BECNs: Indicates congestion of frames. The forward explicit
congestion notification (FECN) indicates too much data at too high a
speed is being received. The backward explicit congestion
notification (FECN) indicates too much data at too high a speed is
being sent.
LED Status
This section shows the current real-time status of the Netopia
Router’s LEDs. It is useful for remotely monitoring the router’s
status. The Quick View screen’s arrangement of LEDs corresponds
to the physical arrangement of LEDs on the router.
All interfaces
LED Status
-----ETHERNET------+--CH1-----MGMT----CH2---+-CARD-+-PWR +-------LEDS--------
LNK LNK TX COL AUI RX LNK RDY TX RX LNK |'-'= Off 'E'= Error
- - - - - - - - - - - - O |'O' = On '*'= Blink