Netopia Router PN Series - Manual (Page 63)

Configuring ISDN and Leased Line Connections 2-47
If Must Match a Defined Profile is set to No, you can also set the
following parameters for accepted calls that do not match a
connection profile:
■ Network Address Translation
■ Inter face-based Routing or System-based Routing
■ Firewall Filter Set
■ Transmit RIP
■ Receive RIP
■ TX RIP Policy to use either Split Horizon or Poison Reverse
■ Net BIOS Packet Forwarding
■ Net BIOS Path Delay
■ Periodic RIP Timers
■ Periodic SAP Timers
Call acceptance scenarios
The following are a few common call acceptance scenarios and
information on how to configure the router for those purposes.
■ To accept all calls, regardless of whether they match a
connection profile:
■ Toggle Must Match a Defined Profile to No.
■ To only accept calls that match a connection profile through use
of a name and password (or secret):
■ Toggle Must Match a Defined Profile to Yes, and
■ Set Authentication to PAP or CHAP.
Note: The authentication method you choose determines which
connection profiles are accessible to callers. For example, if you
choose PAP, callers using CHAP or no authentication will be
dropped by the answer profile.