Netopia Router PN Series - Manual (Page 41)

Configuring ISDN and Leased Line Connections 2-25
■ If you choose to use CACHE-TOKEN, select Send User
Name and enter a name for your Netopia Router. Then,
select Send Password and enter a secret name or number.
If you will be using SecurID (an added method of security
authentication), check with your network administrator to find
out if you will need to use either PAP-TOKEN, or
CACHE-TOKEN. (Also, see Chapter 9, “Security-Token
Authentication”.)
PPP/MP Options
Data Compression... Ascend LZS
Send Authentication... PAP
Send User Name:
Send Password:
Receive User Name:
Receive Password: +-------------------+
+-------------------+
B-Channel Usage... | Dynamic |
| 1 B-Channel |
BAP Usage... | 2 B-Channels |
| 2 B, Preemptable |
Maximum Packet Size: +-------------------+
Applicable only to
Switched circuits
■ Select B-Channel Usage and choose how this connection
profile will use the ISDN line’s B-channels. From the pop-up
menu highlight either Dynamic, 1 B-Channel, 2 B-Channels, or
2 B, Pre-emptable.
■ Dynamic (default setting), allows the connection profile to
use one or both channels at any time during a call. The
decision to alternately use or drop the second B-channel is
based on an algorithm that looks at traffic volume over
time. With Dynamic, one B-channel may be relinquished to