Netopia Router PN Series - Manual (Page 120)

5-16 Reference Guide
6. To specify an IPX node address for the filter to match on, select
IPX Node Address and enter an IPX node address.
7. Select ADD FILTER NOW to save the current filter. Select
CANCEL to exit the Add SAP Filter screen without saving the
new filter.
Deleting a SAP filter
To delete a SAP filter, select Delete IPX SAP filter in the IPX Filters
and Filter Sets screen to display a table of filters. Select a filter from
the table and press Return to delete it. Press the Escape key to exit
the table without deleting the filter.
IPX SAP filter sets
Before IPX SAP filters can be used, they must be grouped into sets.
A SAP filter can be part of more than one filter set.
Viewing and modifying SAP filter sets
To display a table of IPX SAP filter sets, select Show/Change IPX
SAP Filter Sets in the IPX Filters and Filter Sets screen to display a
list of filter sets.
To modify any of the filter sets in the list, select the desired filter set
and go to the Change SAP Filter Set screen. The parameters in this
screen are the same as the ones in the Add SAP Filter Set screen
(see the previous section).
Adding a SAP filter set
To add a new IPX SAP filter set, select Add IPX SAP Filter Set in the
IPX Filters and Filter Sets screen and go to the Add SAP Filter Set
screen.